Sleeveless Pullover

Knitted on the Bond.

Pullover

I didn’t do the 1×1 rib as in the instructions, instead I did 2×1 rib.

KNITWARE SWEATER DESIGN

Flat (Bottom-Up) Regular length Straight Pullover with Ribbing
Set-in Classic shoulder Sleeveless with Ribbing
Ballet front neck and Shallow back neck with Single Band collar

Printed: 18/10/2010
Pattern File Name: Lavenda Double Crepe
Size: Standard Woman 36 for Myself

Date started: 18/10/2010 Finished: *

YARN DESCRIPTION:
Lister Lavenda; Lilac; Wool; *

GAUGE DATA:
Gauge (Stocking stitch over 4 in = 10 cm): 21.0 sts by 30.0 rows.
Body knit by Bond/ISM/USM using KP2
Ribbing knit by Bond/ISM/USM using KP2

FINISHED DIMENSIONS: (ins): … with Moderate fit.
Chest: 38.4 Armhole: 16.2 Top Neck Opening: 9.3
Hem Width: 16.4 Front Neck Width: 5.9
Front Neck Depth: 3.1
Hem Width: 38.4 Hem Length: 0.5 Back Neck Width: 7.9
Back Width: 14.1 Back Neck Depth: 0.5
Body Length: 23.0 Collar Length: 1.0
Hem Length: 2.5

Note: Read ALL these instructions thoroughly BEFORE starting to knit. There may be sections where there are two shapings to work at the same time (such as necklines or waist shaping). The pattern may call for more needles than you have on your machine.

NOTE: At most, 102 needles are required to make the body of this garment; but the collar/hood needs 118 needles.

BACK:
1. Cast on 102 sts in MY, using KP2 and closed edge method. Work in 1×1 rib for 22 rows. COR.
2. Change to KP2 and Stocking stitch, RC000. Work 86 rows. COR.
3. Armhole shaping. Cast off 8 sts at beginning of next 2 rows. COR. Dec 1 st at each end of every alternate row for 16 rows. Total 104 rows with 70 sts remaining. Continue until 150 rows total, with 70 sts remaining.
4. Shape neck. COR. Thread center 42 sts to WY. 14 sts each side.
5. Right neck. LH needles in HP. Dec 1 st at neck edge every row 3 times, until 11 sts remain. At row 152, at the same time, start shoulder shaping.
6. Shoulder shaping. Cast off remaining sts at armhole edge of next row. Total 153 or 154 rows.
7. Left neck. COL. Work as for right neck, reversing shapings.

FRONT:
1-2 Follow steps 1 and 2 as for back. COR.
3. Armhole. Dec for armhole at both ends, as for back. Continue until 130 rows total, with 70 sts remaining.
4. Shape neck. COR. Thread center 30 sts to WY. 20 sts each side.
5. Right neck. LH needles in HP. Dec 1 st at neck edge every row 9 times, until 11 sts remain. Then work 13 row(s) even. Total 152 rows.
6. Shoulder shaping. Cast off as for back.
7. Left neck. COL. Work as for right neck, reversing shapings.

LEFT SHOULDER SEAM:
1. Sew front to back along left shoulder seam.

BALLET FRONT NECK SINGLE BAND COLLAR:
1. Bring out 118 needles to HP. With wrong side of work facing, rehang 3 sts from right back neck edge, 42 sts from back neck holder, 3 sts from left back neck edge, 20 sts from left front neck edge, 30 sts from front neck holder and 20 sts from right front neck edge. Hang weights. Push needles to FWP, latches open. Use KP2 with COR.
2. Work 10 rows. Convert to 1×1 rib. Cast off loosely.

RIGHT SHOULDER SEAM:
— as for left shoulder seam.

ARMHOLE RIBBING:
1. With wrong side of work facing, pick up sts along armhole edge between side seams onto 105 needles, leaving every other needle in NWP. Hang weights.
2. Knit 1 row using KP2. Change to KP2 and knit 6 rows.
3. Convert to 1×1 rib using latchet tool. Cast off loosely.

FINISHING:
1. Sew side seams. Sew any remaining seams.
2. Darn/weave/sew in all loose ends.

AMOUNT OF YARN REQUIRED TO MAKE GARMENT:
17.7 Grams makes 40.0 stitches by 60.0 rows.
Amount needed:
191.4 for body
42.4 for ribbing and/or hems
8.7 for collar/hood
242.5 Grams TOTAL

NOTES:

Pattern designed by: Susan
with KNITWARE DESIGN (Version 2.50.2) from Morningdew Consulting Services Ltd
ph: (250)652-4097 fax: (250)652-5285 web: http://www.knitware.ca email: info@knitware.ca

Advertisements
This entry was posted in machine knitting, Patterns. Bookmark the permalink.

8 Responses to Sleeveless Pullover

  1. Passapman says:

    VERY NICE! Thank you for posting this

  2. Jackie says:

    Thank you!
    This reminds me to get back to my knitting more often:)

  3. Ginny says:

    How would you go about making a larger size, chest size 48?

    • susyranner says:

      I would recommend that you download the Knitware software then re-create the pattern yourself using the style components that I selected (they are at the top of the instructions for the pattern) and using your own tension measurements. That way you’ll end up with a garment that looks the same as mine but the pattern will be tailored to suit your size and yarn.

Comments are closed.